China Standard Agricultural 4 Wheel Drive Big Power Tractor 32+32 Gearbox with High Quality 180-220HP Diesel Engine near me manufacturer

Product Description

Model CFH1804L CFH2004L CFH2204L
Type Water and drought dual-purpose, four-wheel drive
Power output shaft power (KN) 118.3 125 137.7
Traction force (KN) 35 37 39
Overall dimension mm Long (to front counterweight) 5300
Width (common track width) 2328
high To top of exhaust pipe 2945
To the top of air filter 3175
To top of cab 3072
Wheelbase (mm) 2825
Track width (mm) Front wheel 1700, 1800 (commonly used), 1912, 2080
Rear wheel Stepless adjustable track width: 1750 ~ 1854 (commonly used 1800), optional fixed track width: 1800
Minimum ground clearance (mm) 500
Turning circle Radius (m) Unilateral non braking 6.1
Unilateral braking 5.2
Total weight kg Structural quality With cab 5720 6571
Minimum quality in use With cab 6100 6400
Front counterweight (kg) (optional) 480 or 560 or 640 or 800
Rear counterweight (kg) (optional) 200 or 400 or 600
Theoretical speed km / h Gear With 20.8-38 tires
routine crawl
Forward (f) Reverse (R) Forward (f) Reverse (R)
Slow gear 1st gear 2.32 2.24 0.26 0.25
Second gear 3.07 2.96 0.34 0.33
Third gear 4.02 3.89 0.45 0.44
Fourth gear 4.94 4.78 0.55 0.54
Low grade 1st gear 5.97 5.77 0.67 0.65
Second gear 7.88 7.62 0.88 0.86
Third gear 10.34 9.99 1.16 1.12
Fourth gear 12.7 12.28 1.43 1.38
Mid range 1st gear 6.91 6.68 0.78 0.75
Second gear 9.12 8.82 1.02 0.99
Third gear 11.97 11.57 1.34 1.3
Fourth gear 14.71 14.22 1.65 1.6
high-grade 1st gear 16.35 15.8 1.84 1.77
Second gear 21.59 20.87 2.42 2.34
Third gear 28.33 27.38 3.18 3.08
Fourth gear 34.8 33.64 3.91 3.78

ZheJiang CZPT Agricultural Equipment Co.,Ltd, 1 of the 3 subsidiaries of Changfa Group, is a large agricultural equipment manufacturing enterprise engaged in research and development, production and sales of agricultural equipment. Its headquarter is located in No. 555, Xihu (West Lake) Dis.n East Road, Lijia town ,HangZhou city, ZheJiang province. The company has 8 divisions, 5 subsidiaries. It covers an area of over 130 hectares and has more than 4000 employees and over 500 technicians.
The company adheres to the development concept of “market-orientation” and “mainstream products transcending”, so the company focuses on the R&D of core technologies and basic theories. Now the company has independent design ability of tractor, harvester, rice transplanter, CZPT dryer, diesel engine with 4 cylinders and below. The company is now developing its product mufti-functionality and intelligence step by step. At present, the company has in total 203  patents in force, including 21 patents for invention.
As a comprehensive agricultural machinery manufacturing enterprise, “Bring up high-quality employees, produce high-quality products, create high level enterprise, and build up a well-known brand” is our business philosophy. Relying on a strong technical force and advanced technology, we have designed and produced a lot of high quality agricultural products at home and abroad including diesel engine, transplanter, tractor, crawler type combine harvester, wheeled type combine harvester, CZPT dryer, generator and implements etc..
Changfa  Agricultural Equipment Co.,Ltd adheres to the concept of “customer satisfaction comes first” and has set up a complete sales-service network system of more than 600  first-level dealers, over 2000 second-level dealers throughout large and medium-sized cities all around China, and of more than 1500 trained professional service staff (full-time and part-time). A complete, well-developed parts supply system and e-commerce platform has also been set up for a multi-faceted service.
Changfa has diversified distribution channel in domestic market and also has a long-term plan for overseas market distribution channel.10% of all CZPT products have been sold to over 60 countries across South America, Africa, Middle East and Southeast Asia.
The Party and country leaders have paid high attention to and have given high recognition on the rapid development of our company.  Premier Wen Jiabao and vice premier Li Keqiang visited CZPT in early 2009. Premier Wen deeply encouraged CZPT staff: ” China is the world’s most populous country, also the country with the largest population of farmers. The best agricultural machinery in the world should be produced in China. I hope, you can produce the best agricultural equipment here”.

 

How to Select a Gearbox

When you drive your vehicle, the gearbox provides you with traction and speed. The lower gear provides the most traction, while the higher gear has the most speed. Selecting the right gear for your driving conditions will help you maximize both. The right gearing will vary based on road conditions, load, and speed. Short gearing will accelerate you more quickly, while tall gearing will increase top speed. However, you should understand how to use the gearbox before driving.
gearbox

Function

The function of the gearbox is to transmit rotational energy to the machine’s drive train. The ratio between input and output torque is the ratio of the torque to the speed of rotation. Gearboxes have many different functions. A gearbox may have multiple functions or 1 function that is used to drive several other machines. If 1 gear is not turning, the other will be able to turn the gearbox. This is where the gearbox gets its name.
The pitch-controlled system has an equal number of failure modes as the electrical system, accounting for a large proportion of the longest machine downtime and halt time. The relationship between mechanisms and faults is not easily modeled mathematically. Failure modes of gearboxes are shown in Fig. 3. A gearbox’s true service life is 6 to 8 years. However, a gearbox’s fault detection process must be developed as mature technology is required to reduce the downtime and avoid catastrophic incidents.
A gearbox is a vital piece of machinery. It processes energy produced by an engine to move the machine’s parts. A gearbox’s efficiency depends on how efficiently it transfers energy. The higher the ratio, the more torque is transferred to the wheels. It is a common component of bicycles, cars, and a variety of other devices. Its 4 major functions include:
In addition to ensuring gearbox reliability, a gearbox’s maintainability should be evaluated in the design phase. Maintainability considerations should be integrated into the gearbox design, such as the type of spare parts available. An appropriate maintenance regime will also determine how often to replace or repair specific parts. A proper maintenance procedure will also ensure that the gearbox is accessible. Whether it is easy to access or difficult to reach, accessibility is essential.

Purpose

A car’s transmission connects the engine to the wheels, allowing a higher-speed crankshaft to provide leverage. High-torque engines are necessary for the vehicle’s starting, acceleration, and meeting road resistance. The gearbox reduces the engine’s speed and provides torque variations at the wheels. The transmission also provides reversing power, making it possible to move the vehicle backwards and forwards.
Gears transmit power from 1 shaft to another. The size of the gears and number of teeth determine the amount of torque the unit can transmit. A higher gear ratio means more torque, but slower speed. The gearbox’s lever moves the engaging part on the shaft. The lever also slides the gears and synchronizers into place. If the lever slips to the left or right, the engine operates in second gear.
Gearboxes need to be closely monitored to reduce the likelihood of premature failure. Various tests are available to detect defective gear teeth and increase machine reliability. Figure 1.11(a) and (b) show a gearbox with 18 teeth and a 1.5:1 transmission ratio. The input shaft is connected to a sheave and drives a “V” belt. This transmission ratio allows the gearbox to reduce the speed of the motor, while increasing torque and reducing output speed.
When it comes to speed reduction, gear box is the most common method for reducing motor torque. The torque output is directly proportional to the volume of the motor. A small gearbox, for example, can produce as much torque as a large motor with the same output speed. The same holds true for the reverse. There are hybrid drives and in-line gearboxes. Regardless of the type, knowing about the functions of a gearbox will make it easier to choose the right 1 for your specific application.
gearbox

Application

When selecting a gearbox, the service factor must be considered. Service factor is the difference between the actual capacity of the gearbox and the value required by the application. Additional requirements for the gearbox may result in premature seal wear or overheating. The service factor should be as low as possible, as it could be the difference between the lifetime of the gearbox and its failure. In some cases, a gearbox’s service factor can be as high as 1.4, which is sufficient for most industrial applications.
China dominates the renewable energy industry, with the largest installed capacity of 1000 gigawatts and more than 2000 terawatt hours of electricity generated each year. The growth in these sectors is expected to increase the demand for gearboxes. For example, in China, wind and hydropower energy production are the major components of wind and solar power plants. The increased installation capacity indicates increased use of gearboxes for these industries. A gearbox that is not suitable for its application will not be functional, which may be detrimental to the production of products in the country.
A gearbox can be mounted in 1 of 4 different positions. The first 3 positions are concentric, parallel, or right angle, and the fourth position is shaft mount. A shaft mount gearbox is typically used in applications where the motor can’t be mounted via a foot. These positions are discussed in more detail below. Choosing the correct gearbox is essential in your business, but remember that a well-designed gearbox will help your bottom line.
The service factor of a gearbox is dependent on the type of load. A high shock load, for example, can cause premature failure of the gear teeth or shaft bearings. In such cases, a higher service factor is required. In other cases, a gearbox that is designed for high shock loads can withstand such loads without deteriorating its performance. Moreover, it will also reduce the cost of maintaining the gearbox over time.

Material

When choosing the material for your gearbox, you must balance the strength, durability, and cost of the design. This article will discuss the different types of materials and their respective applications and power transmission calculations. A variety of alloys are available, each of which offers its own advantages, including improved hardness and wear resistance. The following are some of the common alloys used in gears. The advantage of alloys is their competitive pricing. A gear made from 1 of these materials is usually stronger than its counterparts.
The carbon content of SPCC prevents the material from hardening like SS. However, thin sheets made from SPCC are often used for gears with lower strength. Because of the low carbon content, SPCC’s surface doesn’t harden as quickly as SS gears do, so soft nitriding is needed to provide hardness. However, if you want a gear that won’t rust, then you should consider SS or FCD.
In addition to cars, gearboxes are also used in the aerospace industry. They are used in space travel and are used in airplane engines. In agriculture, they are used in irrigation, pest and insect control machinery, and plowing machines. They are also used in construction equipment like cranes, bulldozers, and tractors. Gearboxes are also used in the food processing industry, including conveyor systems, kilns, and packaging machinery.
The teeth of the gears in your gearbox are important when it comes to performance. A properly meshing gear will allow the gears to achieve peak performance and withstand torque. Gear teeth are like tiny levers, and effective meshing reduces stress and slippage. A stationary parametric analysis will help you determine the quality of meshing throughout the gearing cycle. This method is often the most accurate way to determine whether your gears are meshing well.
gearbox

Manufacturing

The global gear market is divided into 5 key regions, namely, North America, Europe, Asia Pacific, and Latin America. Among these regions, Asia Pacific is expected to generate the largest GDP, owing to rapidly growing energy demand and investments in industrial infrastructure. This region is also home to some of the largest manufacturing bases, and its continuous building of new buildings and homes will support the industry’s growth. In terms of application, gearboxes are used in construction, agricultural machinery, and transportation.
The Industrial Gearbox market is anticipated to expand during the next several years, driven by the rapid growth of the construction industry and business advancements. However, there are several challenges that hamper the growth of the industry. These include the high cost of operations and maintenance of gear units. This report covers the market size of industrial gearboxes globally, as well as their manufacturing technologies. It also includes manufacturer data for the period of 2020-2024. The report also features a discussion of market drivers and restraints.
Global health crisis and decreasing seaborne commerce have moderately adverse effects on the industry. Falling seaborne commerce has created a barrier to investment. The value of international crude oil is expected to cross USD 0 by April 2020, putting an end to new assets development and exploitation. In such a scenario, the global gearbox market will face many challenges. However, the opportunities are huge. So, the market for industrial gearboxes is expected to grow by more than 6% by 2020, thanks to the increasing number of light vehicles sold in the country.
The main shaft of a gearbox, also known as the output shaft, spins at different speeds and transfers torque to an automobile. The output shaft is splined so that a coupler and gear can be connected to it. The counter shaft and primary shaft are supported by bearings, which reduce friction in the spinning element. Another important part of a gearbox is the gears, which vary in tooth count. The number of teeth determines how much torque a gear can transfer. In addition, the gears can glide in any position.

China Standard Agricultural 4 Wheel Drive Big Power Tractor 32+32 Gearbox with High Quality 180-220HP Diesel Engine     near me manufacturer China Standard Agricultural 4 Wheel Drive Big Power Tractor 32+32 Gearbox with High Quality 180-220HP Diesel Engine     near me manufacturer

agricultural gearbox

As one of leading agricultural gearbox manufacturers, suppliers and exporters of mechanical products, We offer agricultural gearbox and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of agricultural gearbox.