China High Power Harmonic Drive Reducer Reduction Gearbox for ATV Vehicles with high quality

Item Description

Item Description:

1.Flexspline is a hollow flanging common cylinder framework.

two.There is a large-diameter hollow shaft hole in the center of the cam of the wave generator. The internal style of the reducer has a assistance bearing.

three.It has a totally sealed structure and is straightforward to put in. It is extremely ideal for the situations exactly where the wire demands to be threaded from the center of the reducer.

Advantages:

The very first:High precision,large torque

The next:committed specialized personnel can be on-the-go to offer design solutions

The third:Manufacturing unit direct sales fantastic workmanship sturdy good quality assurance

The fourth:Item high quality issues have a 1-12 months guarantee time, can be returned for replacement or fix

Company profile:

 

HangZhou CZPT Technological innovation Co., Ltd. set up in 2014, is dedicated to the R & D plant of higher-precision transmission elements. At current, the annual creation ability can attain 45000 sets of harmonic reducers. We firmly feel in top quality 1st. All hyperlinks from raw components to finished goods are strictly supervised and managed, which provides a solid basis for product top quality. Our items are marketed all above the place and abroad.

The harmonic reducer and other higher-precision transmission factors have been independently created by the company. Our firm spends 20% of its revenue each and every calendar year on the study and improvement of new technologies in the sector. There are 5 folks in R & D.

Our advantage is as underneath:

one.7 years of marketing experience

2. 5-particular person R & D group to offer you with technological assist

3. It is marketed at house and overseas and exported to Turkey and Eire

4. The item top quality is guaranteed with a 1-calendar year warranty

5. Products can be tailored

Toughness manufacturing facility:

Our plant has an complete campus The number of workshops is close to 300 Whether or not it’s from the production of uncooked supplies and the procurement of uncooked components to the inspection of concluded items, we are undertaking it ourselves. There is a full manufacturing program

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at commence quit The allowable highest of the common load torque Maximum torque is allowed in an quick Enable the highest speed to be entered Common input velocity is allowed Back again hole layout daily life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 .six twenty.seven 2.1 seven.nine .7 40.three 4.one 7000 3000 ≤30 10000
80 9 .nine 27 two.7 twelve.seven one.three 54.one five.5
one hundred 9 .9 32 three.3 twelve.7 1.three sixty two.1 6.3
17 fifty eighteen.4 1.9 39 four 29.nine three eighty.5 eight.two 6500 3000 ≤30 15000
80 25.3 two.6 49.5 5 31 3.two a hundred.one ten.2
one hundred 27.six 2.eight sixty two six.three forty five 4.6 124.2 twelve.7
20 50 28.eight two.9 64.4 6.six 39 four 112.7 eleven.5 5600 3000 ≤30 15000
80 39.one four 85 8.8 54 five.five 146.one 14.nine
one hundred forty six 4.seven 94.three 9.six 56 5.8 169.one seventeen.2
one hundred twenty forty six 4.7 one hundred ten.2 56 5.8 169.one 17.2
one hundred sixty 46 4.seven one hundred ten.2 fifty six five.eight 169.one 17.two
25 50 forty four.9 four.six 113 11.5 63 six.five 213.nine 21.8 4800 3000 ≤30 15000
eighty seventy two.five 7.four 158 sixteen.one one hundred ten.2 293.3 29.nine
one hundred seventy seven.one 7.9 181 18.4 124 12.7 326.six 33.3
one hundred twenty seventy seven.one seven.nine 192 19.6 124 twelve.7 349.6 35.six
32 fifty 87.four 8.nine 248 twenty five.three 124 twelve.seven 439 forty four.eight 4000 3000 ≤30 15000
eighty one hundred thirty five.7 thirteen.eight 350 35.six 192 19.six 653 sixty six.6
a hundred 157.6 sixteen.one 383 39.one 248 twenty five.3 744 seventy five.9
40 one hundred 308 37.two 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start end The allowable optimum of the regular load torque Maximum torque is allowed in an instantaneous Allow the maximum speed to be entered Regular enter speed is permitted Back again gap layout daily life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty 7 .7 23 two.three nine .nine 46 4.7 14000 8500 ≤20 15000
eighty 10 1 thirty 3.1 14 one.four sixty one six.two
one hundred 10 1 36 three.seven fourteen one.four 70 seven.2
17 fifty 21 two.1 44 four.5 34 three.4 91 nine 10000 7300 ≤20 20000
80 29 2.9 fifty six 5.7 35 three.six 113 12
a hundred 31 three.two 70 seven.two 51 five.two 143 15
20 50 33 three.three seventy three 7.4 44 4.five 127 thirteen 10000 6500 ≤20 20000
80 forty four 4.5 ninety six nine.8 61 6.2 a hundred sixty five 17
a hundred fifty two five.three 107 10.nine sixty four 6.5 191 twenty
a hundred and twenty 52 5.three 113 eleven.five sixty four six.5 191 20
160 fifty two 5.three one hundred twenty twelve.2 64 six.five 191 20
25 50 51 5.2 127 13 seventy two seven.three 242 twenty five 7500 5600 ≤20 20000
80 eighty two 8.4 178 eighteen 113 twelve 332 34
one hundred 87 eight.9 204 21 a hundred and forty 14 369 38
a hundred and twenty 87 8.9 217 22 one hundred forty 14 395 40
32 fifty ninety nine 10 281 29 140 14 497 fifty one 7000 4800 ≤20 20000
eighty 153 16 395 40 217 22 738 seventy five
a hundred 178 eighteen 433 forty four 281 29 841 86
40 one hundred 345 35 738 seventy five 484 forty nine 1400 143 5600 4000 ≤20 20000

Exhibition:
Software case:

FQA:
Q: What ought to I give when I pick gearbox/velocity reducer?
A: The best way is to give the motor drawing with parameter. Our engineer will check and recommend the most appropriate gearbox design for your refer.
Or you can also give under specification as well:
one) Kind, product and torque.
2) Ratio or output pace
three) Doing work condition and link method
four) High quality and installed equipment title
5) Enter manner and input pace
6) Motor model design or flange and motor shaft dimensions

US $349.2
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000
US $349.2
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 <span styl

Tags:

agricultural gearbox

As one of leading agricultural gearbox manufacturers, suppliers and exporters of mechanical products, We offer agricultural gearbox and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of agricultural gearbox.