China Best Sales Zd Horizontal Type High Precision Square 60mm Zdf Planetary Gearbox with Free Design Custom

Product Description

ZD Horizontal Type High Precision Square 60mm ZDF Planetary Gearbox

Product Description

The high-precision planetary gearbox adopts spur gear design, and is used in various control transmission fields with servo motors, such as precision machine tools, laser cutting equipment, battery processing equipment, etc. It has the advantages of large torsional rigidity and large output torque. The backlash of the ZDF series is less than 8 arc.min and the reduction ratio covers 3~512K.

The Product Advantages of Planetary Gearbox:
1.Flexible structure design, in line with various working conditions.
2.Ring gear processing technology: Using internal gear slotting machine and hobbing machine; the precision of ring gear after processing can reach GB7.
3.Hardened gear secondary scraping technology: secondary high-speed dry cutting of gear eliminates gear deformation caused by heat treatment. Gear accuracy can reach GB6.
4.Reliable backlash testing.

How to Read:
60 ZDF 20 ( )  (S) -750   T1
 a    b    c    d    e      f       g
 

a    Frame Size     60 = 60mm
b    Series code: ZDF     Square mounting flange series  
c    Reduction Ratio     Single Stage:  3,4,5,8,10;
    Two Stages:     9,12,15,16,20,25,32,40,64;
    Three Stages:  60,80,100,120,160,200,256,320,512.
d    Backlash     Single Stage: 12 arc.min;
    Two Stages:   15 arc.min;
    Third Stages:  18 arc.min
e    Input shaft type      S:   0ver locking (Omission) (Regardless whether the motor with kevwav can use it.);
     S1: Locking with locking ring (Regardless whether the motor with keyway can use it.);
     S2: Locking with keyway (Input shaft with key);
     K:  With keyway;
     A: Other types (Please contact with us)
f Applicable servo motor power (W),Please contact us for specific power
g Please contact us for the mouting type of the flange

 

Spesifications

 

Product Type Unit Number Of Stage Reduction Ratio 60ZDF
Rated Output Torque N.M 1 3 12
4 16
5 16
8 15
10 12
2 9 40
12 40
15 40
16 44
20 44
25 40
32 44
40 40
64 18
3 60 40
80 44
100 44
120 40
160 44
200 40
256 44
320 40
512 18
Max Radial Torque N / / 450
Max Axial Torque / / 225
Full Load Efficiency % 1 / 96
2 / 94
3 / 90
Backlash arc.min 1 / <8
2 / <12
3 / <15

Demensions(Unit: mm):  


 

Product type No. of stage LI  L3  L4  L5  L6  L7 L8  L11  D4  D5  D6  D7 D8
60ZDF 1 113.5 46.5 35 30.5 25 2.5 3 8 Φ14h7 Φ17 Φ50h7 60 Φ70
2 126.5 59.5
3 139 72
1,2,3 D9 B1 H1  G3  L2  L9 L10  D1  D2 D3 G1  Q3   
Φ5.5 5 16 M5X12 32 30 10 Φ70 Φ50G7 ≤Φ14G7 M5X12 60

 

Detailed Photos

 

Mechanism

Single support mechanism
1.The planetary gear is placed at 1 end of the output shaft.
2.The output shaft bearing is placed at 1 end of the planetary gear.
3.Separate sun gear and coupling.

Compact output shaft mechanism
It adopts the design of output shaft integrated system, compact structure, high rigidity, and it can withstand large impact. Place the input coupling and the sun gear at the center of the output shaft to improve the concentricity of the components, thereby effectively controlling the gear clearance and improving the backlash of the whole gearbox.

Structure

Ring gear structure
The integral structure of the ring gear and the output flange improves its rigidity and reduces misassembly.

 

More details

More products,please click here…

Company Profile

Delivery

Our Services

1.Maintenance time & Warranty: 1 year after leaving factory.

2.Other service: Including modeling selection guide, installation guide, and problem shooting guide, etc.

FAQ

Q: What’re your main products?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, High Precision Planetary Gearbox and Precision Cycloidal Gearbox etc.. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of  molds are necessory to be developped which may need exact cost and design charging. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are 2 main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the 2 major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is 10 to 20 m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the 2 rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Best Sales Zd Horizontal Type High Precision Square 60mm Zdf Planetary Gearbox     with Free Design CustomChina Best Sales Zd Horizontal Type High Precision Square 60mm Zdf Planetary Gearbox     with Free Design Custom

agricultural gearbox

As one of leading agricultural gearbox manufacturers, suppliers and exporters of mechanical products, We offer agricultural gearbox and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of agricultural gearbox.