China 40 Size Harmonic Drive Reducer Gearbox Widespread Use agricultural gearbox generator

Product Description

Item Description:

one.Flexspline is a hollow flanging standard cylinder framework.

two.There is a big-diameter hollow shaft gap in the center of the cam of the wave generator. The inside layout of the reducer has a assistance bearing.

three.It has a completely sealed composition and is effortless to install. It is extremely suitable for the events exactly where the wire wants to be threaded from the centre of the reducer.

Positive aspects:

The first:Large precision,substantial torque

The next:dedicated technological staff can be on-the-go to provide style remedies

The 3rd:Manufacturing facility immediate product sales wonderful workmanship sturdy quality assurance

The fourth:Product high quality troubles have a 1-year warranty time, can be returned for substitution or repair

Business profile:

HangZhou CZPT Technological innovation Co., Ltd. set up in 2014, is dedicated to the R & D plant of large-precision transmission factors. At current, the once-a-year generation capacity can reach 45000 sets of harmonic reducers. We firmly feel in good quality 1st. All hyperlinks from raw components to completed merchandise are strictly supervised and controlled, which gives a strong basis for product high quality. Our goods are bought all more than the nation and abroad.

The harmonic reducer and other substantial-precision transmission components were independently developed by the company. Our company spends twenty% of its product sales every calendar year on the investigation and development of new technologies in the market. There are 5 folks in R & D.

Our advantage is as underneath:

one.7 years of marketing encounter

2. 5-person R & D team to give you with technical support

three. It is offered at property and overseas and exported to Turkey and Ireland

four. The merchandise top quality is guaranteed with a a single-calendar year guarantee

five. Items can be personalized

Toughness manufacturing unit:

Our plant has an whole campus The number of workshops is about three hundred Regardless of whether it is from the production of uncooked materials and the procurement of uncooked supplies to the inspection of completed products, we are undertaking it ourselves. There is a complete production system

HST-III Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at commence quit		The allowable maximum of the typical load torque		Maximum torque is authorized in an instantaneous		Enable the maximum pace to be entered	Common enter speed is allowed	Back again gap	design and style lifestyle
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	fifty	six.2	.six	twenty.7	two.one	seven.9	.seven	40.three	4.1	7000	3000	≤30	10000
	eighty	nine	.nine	27	two.7	12.seven	one.3	54.1	5.5
	one hundred	9	.nine	32	three.three	twelve.seven	one.3	sixty two.one	six.three
17	fifty	18.four	1.9	39	4	29.9	3	eighty.five	eight.2	6500	3000	≤30	15000
	eighty	twenty five.three	2.6	forty nine.five	5	31	three.2	a hundred.one	10.2
	100	27.6	two.8	62	6.3	45	four.6	124.2	12.seven
20	fifty	28.8	2.9	64.4	six.six	39	4	112.7	eleven.five	5600	3000	≤30	15000
	eighty	39.one	four	85	eight.8	54	five.five	146.1	fourteen.9
	one hundred	forty six	four.seven	ninety four.three	nine.6	fifty six	5.8	169.one	17.two
	120	46	four.7	a hundred	10.two	56	5.8	169.1	17.two
	a hundred and sixty	46	four.7	a hundred	10.2	fifty six	5.8	169.1	17.2
25	fifty	44.9	4.six	113	11.5	sixty three	6.5	213.nine	21.eight	4800	3000	≤30	15000
	80	seventy two.five	7.4	158	16.1	100	ten.two	293.three	29.9
	100	77.one	7.9	181	eighteen.4	124	12.7	326.6	33.three
	a hundred and twenty	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	eight.nine	248	twenty five.three	124	12.seven	439	44.eight	4000	3000	≤30	15000
	80	a hundred thirty five.seven	13.eight	350	35.six	192	19.six	653	sixty six.6
	a hundred	157.6	sixteen.1	383	39.one	248	25.3	744	seventy five.nine
40	a hundred	308	37.two	660	sixty seven	432	44	1232	126.7	4000	3000	≤30	15000

HSG Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at begin quit		The allowable optimum of the regular load torque		Maximum torque is permitted in an instantaneous		Enable the highest speed to be entered	Common input pace is allowed	Again hole	design daily life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	fifty	seven	.7	23	two.3	9	.nine	46	4.7	14000	8500	≤20	15000
	eighty	ten	one	thirty	three.1	fourteen	1.4	61	six.two
	a hundred	ten	1	36	three.7	fourteen	one.four	70	seven.two
17	50	21	two.one	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	eighty	29	2.9	fifty six	five.7	35	three.6	113	twelve
	a hundred	31	three.two	70	seven.2	fifty one	five.2	143	fifteen
20	50	33	three.three	73	7.4	44	four.5	127	13	10000	6500	≤20	20000
	eighty	44	four.5	96	9.8	61	six.2	165	17
	one hundred	fifty two	five.three	107	10.nine	64	six.five	191	20
	a hundred and twenty	fifty two	5.three	113	11.5	sixty four	six.5	191	twenty
	160	52	5.3	120	12.2	64	6.five	191	twenty
25	50	51	5.2	127	thirteen	seventy two	7.3	242	25	7500	5600	≤20	20000
	eighty	82	eight.four	178	18	113	twelve	332	34
	one hundred	87	eight.nine	204	21	140	14	369	38
	120	87	8.nine	217	22	one hundred forty	fourteen	395	forty
32	50	99	10	281	29	one hundred forty	fourteen	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	seventy five
	one hundred	178	18	433	44	281	29	841	86
40	a hundred	345	35	738	seventy five	484	forty nine	1400	143	5600	4000	≤20	20000

Exhibition:
Software case:

FQA:
Q: What ought to I offer when I select gearbox/speed reducer?
A: The ideal way is to give the motor drawing with parameter. Our engineer will examine and recommend the most ideal gearbox design for your refer.
Or you can also supply below specification as effectively:
one) Type, design and torque.
two) Ratio or output velocity
three) Working problem and relationship technique
four) High quality and set up device name
5) Enter manner and enter speed
6) Motor manufacturer model or flange and motor shaft dimension

US $388.9
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

US $388.9
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

Choosing an Agricultural Gearbox

When it comes to choosing an agricultural gearbox, you may be wondering which one is right for you. The right gearbox for your tractor is important for several reasons. Here are some factors to consider. This article will provide an overview of these components. These parts include the Bevel gearbox, the Surface finish, Ellipticity, Bearings, and more. CZPT P/L offers a range of gearboxes for many different agricultural applications. The company’s PTO Speed Reducer/Increaser is specially designed to maintain the original rotation of PTO output.

Bevel gearboxes

Agricultural bevel gearboxes have high load capacity, making them an excellent choice for heavy-duty machines. Bevel gearing is also popular in mechanical transmission systems, such as those found on tractor transmission systems. Modern harvesters and other agricultural equipment require high-performance gearboxes to maintain efficient performance. To meet these requirements, agricultural equipment OEMs trust the Bevel gearboxes manufactured by CZPT Gearbox Company.
Unlike conventional worm gears, bevel gears use multiple shafts to transmit power. The bevel gears have three types of shafts, namely, hollow, projecting, and double-extended. In addition to being hollow, bevel gears can have additional shafts installed opposite the input shaft. They are available in a standard mount, aluminum housing, and three shaft types: double-extended, hollow, and projecting.
Agricultural bevel gearboxes are typically made from closed-grain cast-iron, although higher-sized models are made from SG 500/7 material. The screw is made from Cr-Mo medium carbon steel, which is hardened and tempered to maintain high core strength. A tapered roller bearing is mounted in the housing and is designed to carry heavy axial and radial loads. These gearboxes are also widely used in mixing, distribution, and cleaning machinery.
Bevel gearboxes for agricultural equipment are primarily used in agricultural machinery applications. Agricultural machinery often uses a PTO to transmit torque, but can only provide it at low speeds. Because of this, gearboxes are used for low-speed, massive-torque applications. Soil preparation and crop treatment are two common uses for these gearboxes. They are also useful in cement mixers.

Surface finish

In engineered gearboxes, the surface finish of the gear tooth surfaces is critical for smooth operation. Microscopic examination of gear tooth surfaces reveals a fine, unidirectional pattern. Traditionally used finishing methods include hob shaving, gear grinding, and honing. These techniques can improve the overall finish, but they also have their drawbacks. To overcome these problems, manufacturers use modern machine tooling techniques.
Agricultural gearboxes must be free from casting defects and mechanical damage. The processing surface must be flawless, with the ellipticity of the shaft hole no greater than 0.02 mm, and the centerline unevenness of the shaft holes is less than 0.015 mm. The relationship between shafts and bearing housing must be within 0.6 mm. These standards are crucial for the operation of agricultural machinery gearboxes.
Earlier, the gears were made of H11 and H13 tool steel, which progressively weakened after 20 gears. The tempering temperature is five to seven degrees Celsius or ten degrees Fahrenheit, depending on the steel used. To address this problem, Alloy 718 was developed. The alloy improved the life of die inserts, which reduced the overall cost. Further, the improved surface finish of agricultural gearboxes helped the customers reduce operating costs.

Ellipticity

A number of tasks require the use of an agricultural gearbox. These tasks can range from gardening to maintaining green spaces. These gearboxes transmit power from the input shaft to the output shaft, facilitating the change in direction, speed, or rotation. A quality gearbox is vital for the performance of agricultural machinery. Consider the type of operation you will be performing before buying one. You will also need to decide whether you will lubricate it.
An CZPT P/L Gearbox is one of their products. The company offers a full line of agricultural gearboxes at competitive prices. These gearboxes are designed to reduce input shaft speed and increase the PTO speed. The PTO Speed Reducer/Increaser is specially designed for this application. It helps maintain the original rotation of the PTO output shaft. It is suitable for various agricultural applications, including harvesters, balers, and cultivators.
An agricultural gearbox has an elliptic nature. It rotates around an axle core 90 degrees to create a bias state. The axle core of an agricultural gearbox rotates at a 90-degree angle to keep the shaft of the farming arbor in a neutral state. The bias state reduces the rotary driving force and reduces the amount of energy used in the operation. If a gearbox is designed correctly, it will keep a desired rotation torque.

Bearings

Agricultural gearboxes require high-quality bearings, and the global market is undergoing a transformation as more agricultural equipment becomes mechanized. The demand for bearings in agricultural equipment is expected to increase in the future, as cropping cycles will become shorter, and machinery will be used more intensively. Consequently, the wear on agricultural gear teeth and bearings will increase. This will result in a higher replacement rate for these parts.
Agricultural gearboxes must be able to withstand the high demands placed on them by the mounted farming implements. Harrows are a common example, and their disc-shaped attachments work to mix the top layer of soil. Because of their high demands, they must rotate continuously, and no matter what the terrain, they must be easy to run. Moreover, customised bearings will provide better seals.
In a study of 53 different agricultural gearboxes conducted by CZPT UK, they simulated 73 gear selections to find the right type of bearing. The simulation model took four weeks to set up and seven hours to run. As a result, CZPT always selects the “best bearing for the job” – a fitting solution. As such, CZPT understands the end user’s needs.

Quality of materials

Agricultural gearboxes play a vital role in the production of food. With the world’s population increasing, the need for food will also increase, and that means a greater need for efficient gearboxes. To make this happen, gearboxes must be able to withstand a variety of environmental conditions, including high and low temperatures, operation in arid and moist environments, and safety regulations.
A bevel gearbox has spiral bevel pinions that transmit rotational power to the axle. It is used in a variety of agricultural applications and is available in a range of ratios, horsepower, and configurations. This right-angle gear drive is widely used in portable grain elevators and grain carts. It has a 15-mm shaft diameter and is compatible with offset rotary fillers and hollow output shafts.
The gear box of a tractor is usually made of grey cast iron. Grey cast iron is a great choice for this component because it provides good wear resistance and vibration dampening. Belt pulleys are also made from grey cast iron. Large belt pulleys are made by casting processes. Similarly, the brake drum material needs to be high-quality to be effective. It is generally made of grey iron ASTM A48 Class 35.

editor by czh 2023-01-17